Deep-Water Intake Group, a joint venture of multiple subsidiaries of the VINCI Group, a worldwide leader in construction and specialized in the design and construction of major civil engineering and building works in Canada, is currently looking for a:
Lifting Supervisor
What is the project?
The Pickering Nuclear Generating Station refurbishment program involves the design and construction of a new deep-water intake in Lake Ontario to improve the plant's cooling system.
The project includes:
- A 1.5 km-long tunnel excavated using a 10.5 m diameter pressurized slurry TBM;
- Two vertical shafts, one onshore and one offshore;
- An offshore modular intake structure resting on the lake bed.
Located in close proximity to an active nuclear generating station, this major infrastructure project requires high standards of safety, planning, coordination and execution.
What you will do
As Lifting Supervisor, you will report to the Lifting Engineer and supervise lifting and hoisting activities in the field.
You will coordinate crane operators, riggers, signallers and subcontractors, verify that lifting operations are ready to proceed and ensure that work is safely executed in accordance with approved lift plans, project procedures and applicable Ontario requirements.
You will have the authority and responsibility to stop any lifting operation when conditions differ from the approved plan or when an unsafe condition, communication failure, equipment issue or unauthorized change is identified.
Your key responsibilities
Safety & Compliance
- Lead daily lifting pre-start meetings and toolbox talks, ensuring lift sequences, roles, hazards, communication methods, exclusion zones and stop-work expectations are clearly understood.
- Ensure lifting activities comply with the Ontario Occupational Health and Safety Act, Ontario Regulation 213/91, project and client requirements, and approved lifting procedures.
- Verify that approved lift plans, hazard assessments, permits and supporting documents are available and understood before work begins.
- Confirm crane operators, riggers and signallers are competent, authorized and familiar with the planned operation.
- Establish and maintain exclusion zones and stop lifting operations when unsafe conditions, communication failures, adverse weather, ground instability or deviations from the approved plan are identified.
- Report incidents, near misses, equipment damage and dropped-object events and support investigations and corrective actions.
Lifting Operations & Field Supervision
- Supervise lifting operations involving crawler cranes, mobile cranes, boom trucks, forklifts, hoists and other lifting equipment.
- Review approved lift plans and verify loads, weights, centres of gravity, rigging arrangements, lifting points, crane configurations, operating radii, travel paths and landing areas in the field.
- Conduct pre-lift briefings and ensure appropriate communication methods are established.
- Direct lifting operations from crane setup through landing and de-rigging while maintaining effective communication with operators and lifting crews.
- Supervise riggers and signallers and coordinate with construction, engineering, health and safety teams, subcontractors and equipment suppliers.
- Coordinate crane utilization, access, deliveries, simultaneous operations, shift handovers and competing lifting requirements.
- Escalate critical, complex, engineered, multi-crane, blind, personnel, marine/offshore or unusual lifts to the Lifting Engineer and ensure required approvals are obtained before proceeding.
Equipment & Rigging Control
- Verify that crane setup, ground conditions, mats, outriggers, counterweights, boom configuration and operating radius comply with approved lift plans and load charts.
- Identify overhead powerlines, underground services, structures, excavations, traffic and other site constraints and ensure required controls are implemented.
- Verify that lifting equipment and rigging accessories have valid inspections, certifications and traceability and are suitable for the intended load.
- Ensure slings, shackles, hooks, spreader beams and other rigging accessories are correctly used.
- Remove defective, damaged, unidentified or expired lifting equipment from service.
- Monitor equipment condition and subcontractor lifting practices and initiate corrective measures when required.
Documentation & Reporting
- Complete or verify daily lifting pre-start records, lift checklists and field reports.
- Maintain accurate records of lifting activities, equipment, crew allocation, delays, constraints, incidents and corrective actions.
- Maintain lifting equipment and accessory records and ensure crane logbooks, load charts and manufacturer information are available.
- Communicate upcoming lifting requirements, crane conflicts and resource needs to the Lifting Engineer and construction supervisors.
- Document lifting-related non-conformances and deviations and track corrective actions through closure.
- Contribute to weekly lifting reports, look-ahead planning and lessons learned.
What you bring to the team
- Minimum 5 years of construction experience involving crane, hoisting and rigging operations, including at least 3 years in a lifting supervisory or senior rigging role.
- Practical knowledge of crawler and mobile cranes, boom trucks, forklifts, hoists, rigging hardware, crane setup and load-chart fundamentals.
- Working knowledge of the Ontario Occupational Health and Safety Act and Ontario Regulation 213/91, particularly requirements applicable to cranes, hoisting, rigging, cables, slings and electrical hazards.
- Recognized rigging and signalling training; a relevant trade qualification or crane/rigging supervisor credential is preferred.
- Current project-required training, including WHMIS and Working at Heights, where applicable. First Aid/CPR and supervisor health-and-safety awareness training are assets or project requirements.
- Ability to read and apply engineered lift plans, crane load charts, equipment manuals, drawings, method statements and risk assessments.
- Strong field leadership, communication and decision-making skills, including the confidence to stop work and escalate concerns.
- Proficiency with Microsoft Office and digital inspection/reporting tools. AutoCAD or drawing-markup capability is an asset.
- Valid Ontario driver's licence.
- Availability to work shifts, weekends or extended hours when required.
What we offer
- Gross annual salary between CAD$ 150K and 200K, depending on experience and profile;
- 4 weeks of vacation and 3 paid emergency/sick days;
- Annual bonus;
- Group Health Insurance, including access to virtual healthcare services;
- RRSP Program;
- Career development opportunities;
- A diverse and inclusive work environment;
- The opportunity to contribute to a major and technically challenging infrastructure project.
At Deep-Water Intake Group, we believe that diversity is a source of strength. We are committed to creating an inclusive working environment where every individual is valued and respected. We strongly encourage applications from members of Indigenous communities and are committed to providing fair and respectful employment opportunities and supporting their professional development.
By joining our team, you will contribute to a workplace that values diversity, inclusion and collaboration.